View Single Post
boosted79 boosted79 is offline
Registered User
 
Join Date: Jan 2015
Posts: 1,266
Got the rods back and checked the clearances with Mitu mic and Fowler bore gauge. Tightest is #1 at 1.5, #2 - #5 at 2.0-2.3, #6 at 2.5 thou". Good to go. For high rpm race I'd want 2.5- 3.0 but this is fine for a 6k street engine. Now to fab a fixture to balance the rods since they were cut and I used solid bushings.
Old 05-24-2016, 06:22 AM
  Pelican Parts Technical Article Directory    Reply With Quote #50 (permalink)