View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 2,808
While it is cheap insurance and will probably work, the gunk you put in the rocker shaft mounts will require some cleaning at a later date. I tore an engine down that had similar and it was a PITA. having said that I have never had that area leak (while I am sure others have other stories). So I choose not to do the gunk approach - but do use O rings. I do not use the RSR ones (expensive I think from memory) but I found a selection of regular O rings that piggy back on each other and do a perfect job (assuming the stock mounting was going to leak), for about $5
Regards
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 08-24-2016, 12:11 AM
  Pelican Parts Technical Article Directory    Reply With Quote #69 (permalink)