View Single Post
Reanimotion Reanimotion is offline
umop apisdn
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 503
Originally Posted by JeanaPerry View Post
Will you be offering a package with the above items and whatever basic sensors needed to get this going?
Hi, contact mike at Dkubus -
He will be happy to help provide what you need

Originally Posted by flightlead404 View Post
Should these After Start Enrichment and Warm Up Enrichment tables be disabled or zeroed out somehow? Left alone? Would we be better off using these functions to control warm up mixture and make our Base Pressure Map a flat line?
The stock WUR performs both of these functions, so I initially zeroed out the tables
After start and taper all zero
Warm up all 100
once you get it running then flattening the base control pressure curve and introducing the Warm up and After start adjustments is definitely an option

Because of the electric heater in the stock WUR it actually is closer to the After Start table in operation - stock it begins at the pressure assigned to the current temperature but goes to full lean within arounnd two minutes because of the internal heater.

Originally Posted by hight View Post
got both wires (opto+) connected to the coil, but no signal. i'am using a 123tune ignition, no standard one.

is that a problem?
Opto+ to coil+ and Opto- to coil- ? Unless 123tune are doing something weird to control the coil it should work if the system is using a standard 12v coil
It might be best to move the opto+ input to the tacho signal if you can and opto- to ground
the coil connection is designed for 12v points ignition so may not be liking the electronic distributor
1981 928S 4.7 ROW with KE3-Jetronic and Franken8 (AEM Inifinty) follow at []
Yes! mechanical/hydraulic constant flow injection can be managed by a modern EMS
Old 09-05-2016, 04:18 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #605 (permalink)