View Single Post
sladey sladey is offline
Registered User
sladey's Avatar
Join Date: Feb 2006
Location: Nottingham, UK
Posts: 79
I've got the elephant racing cross brace - very happy with it.

At the front it relies on screwing through to some substantial (3mm thick?) backing plates that go the other side of the body panel - in the inner wing. So it isn't screwed into the inner wing, it's effectively clamped to it and very strongly - the inner wing is sandwiched between the two elephant racing brackets.

I've no idea if you could cut 20mm off and re-thread it - you'd be better off asking Chuck at Elephant Racing. However if you do then you're also moving slightly the point at which the two struts join each other - don't know if that would cause a problem.

IMHO I would suggest if you fit it then fit what they supply in the way that they supply it
The simple things you see are all complicated;
I look pretty young but I'm just backdated
Old 09-05-2016, 11:55 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #564 (permalink)