View Single Post
philip j philip j is offline
Registered User
 
Join Date: Jul 2009
Location: Ontario
Posts: 1,640
Quote:
Originally Posted by jpilcher View Post
Hi All

I am currently using a Bosch CHT sensor. It's fitted in the head of cylinder number 3.
Warms up very quickly. I would like to retain this, but I don't want to have to take apart the shroud in order to test the temperature calibration.

Anyone have any data on this sensor?

Thanks

John

Hi John, I have my sensor installed on cylinder #1, and just have to pull off the cover plate at the end of the shroud to get to the sensor. About 10 min work to get at it. Philip
__________________
87 930 GHL/Rarlyl8 dual/Garretson/GT3582R/1 Bar/Wevo shift, mounts/Meth inj/LC-1/Custom Fuchs/Carrera intake manifold/Xtreme Carrera heads P&P/3.4/DR 993SS cams/ Mahl/Pauter/JE/Niresist/ARP/twin plug coil packs/8.25:1/KEP stage 2/twin tials/close 2,3,4th. SDS EFI tuning always in progress. 500+ HP, BTSOMP Dyno
Old 12-05-2016, 03:22 AM
  Pelican Parts Technical Article Directory    Reply With Quote #43 (permalink)