View Single Post
Reanimotion Reanimotion is offline
umop apisdn
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 501
try swapping the connection to Opto+ with VR1+

Connect VR1+ to TD
OPTO- can be left grounded
OPTO+ should now not be connected to anything
VR1- needs to remain unconnected to anything

if you want to avoid altering your harness the pins at the microsquirt connector can be swapped, it's a little tricky to do - the red locking shell needs to be levered up one click and then the wires can be pulled while twisting. There is an ampseal manual that describes the process.
1981 928S 4.7 ROW with KE3-Jetronic and Franken8 (AEM Inifinty) follow at []
Yes! mechanical/hydraulic constant flow injection can be managed by a modern EMS
Old 12-07-2016, 07:46 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #671 (permalink)