View Single Post
Reanimotion Reanimotion is offline
umop apisdn
 
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 440
sadly the attached log file contained no data

if you increase the max allowable DC to 98% or more does the control pressure result below 290 improve? It's possible the WUR may require a larger flow capacity injector, but the 930 control pressure circuit should not be significantly different to the other Bosch variants

also note that warm up enrichment and after start settings in the last supplied tune file are all turned off and both maps are still flat 100 so there is little to no compensation happening outside of the base WUR pressure curve
__________________
Steve
1981 928S 4.7 ROW with KE3-Jetronic and Franken8 (AEM Inifinty) follow at [http://www.frankencis.com/Activity-Feed/userid/2]
Yes! mechanical/hydraulic constant flow injection can be managed by a modern EMS

www.FrankenCIS.com
Old 01-05-2017, 04:58 PM
  Pelican Parts Technical Article Directory    Reply With Quote #716 (permalink)