View Single Post
Reanimotion Reanimotion is offline
umop apisdn
 
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 441
Regarding the warm start log

biggest concern is the 10 seconds after start where the CP is pegged at system pressure
prior to start the eWUR duty was at 5%, I suspect that the fuel pump starting with the injector closed locked the injector shut with 100psi on the back of the valve
was your minimum set duty during that run 5% or 20% ?

if 20% as per the supplied tune, I'll have to look at the code in case it's overriding the minimum
At 100 psi system pressure I think we need it to be bleeding off fuel before the pump kicks in

the larger injector may change things of course
__________________
Steve
1981 928S 4.7 ROW with KE3-Jetronic and Franken8 (AEM Inifinty) follow at [http://www.frankencis.com/Activity-Feed/userid/2]
Yes! mechanical/hydraulic constant flow injection can be managed by a modern EMS

www.FrankenCIS.com
Old 01-08-2017, 07:58 AM
  Pelican Parts Technical Article Directory    Reply With Quote #733 (permalink)