View Single Post
Tippy Tippy is offline
Chain fence eating turbo
 
Join Date: Dec 2008
Location: Austin, TX
Posts: 8,844
Quote:
Originally Posted by jbrown View Post
I no Tippy you have had good luck with the Kep with the g50, I have a short bell housing 930 tranny and my motor is 500hp EFI. I had a centerforce cluth in there originally and loved it , smooth clutch and held the power.When I went to EFI, the clutch starting slipping. So I went with the suggestion of pelican members I went with Kep stage 2. I HATE IT!!!!!!!!! clutch is way to hard, started off soft and got harder as time went on. Shifts good in warm weather but when it gets under 50deg I cant get the car in gear. I have to warm the car up before I drive it...
I upgraded my pedals to 930 pedals , new clutch cable, cut thru wood floor board for more throw. nothing helped. I no the G50 is a hydraulic system so it might work better but for the shortbell housing 930 I have had no luck.
Hate to say it, but you may need to remove the floorboard. KEP's don't disengage fully with it.
Old 01-12-2017, 10:39 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)