View Single Post
reclino reclino is offline
Registered User
 
Join Date: Jul 2009
Location: Eastern North Carolina
Posts: 396
Garage
The valve covers and cam carriers had some pitting on the gasket surface. More than I thought would seal with new gaskets. So I pulled all the studs from the cam carriers. I ordered two 16*48 sanding belts. 220 and 320 grit. I have a piece of granite countertop about 16*35. So I cut open the 220 belt, layed it out on the slab of stone and proceeded to make the valve covers flat. Next up cam carriers.







My son helped hold the paper while I sanded.

Old 03-01-2017, 04:50 PM
  Pelican Parts Technical Article Directory    Reply With Quote #162 (permalink)