View Single Post
Reanimotion Reanimotion is offline
umop apisdn
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 501
the below is rebuilt from the logs so only shows used cells, but should have the same or similar values to your current VE2 table

you want the dark green cells in the 501 and 800 rpm columns to be the same at 93 to eliminate the VE change when MAP changes for testing

If it still plays up even with the flatter VE values then there is something else in play outside of the FrankenCIS control that is messing with your startup

If the RPM change goes away, then it's simply a matter of refining those cells to get a good idle pre and post the MAP blip on startup

1981 928S 4.7 ROW with KE3-Jetronic and Franken8 (AEM Inifinty) follow at []
Yes! mechanical/hydraulic constant flow injection can be managed by a modern EMS
Old 05-01-2017, 07:54 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #841 (permalink)