View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 2,808
Quote:
Originally Posted by Jim2 View Post
What weight oil are you running?

Roughly how many miles on this current oil?

What is the idle speed of your engine?

Have you inspected the breather hose from the engine to tank, tank to air filter, looking for obstructions?
Jim2, if he can blow oil thru the turbo 'seals' at approx 2 psi pressure, there has to be something seriously wrong with the build/tolerances. Should not happen. I wonder if there is a problem with the shaft - but we can only guess from here. A rebuild specialist would have to take a look.
SBK, I will email my turbo guy who did my 7006 rebuild. this required replacing the shaft, once he opened it. I will ask for his helicopter view of where the issue may be.
You are prob just as well off to use the guy in perth, but the postage to NZ is prob about the same.
Regards
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 06-04-2017, 05:31 PM
  Pelican Parts Technical Article Directory    Reply With Quote #149 (permalink)