View Single Post
jpilcher jpilcher is online now
Registered User
Join Date: Mar 2010
Location: Hamilton, On
Posts: 747
Hi guys

Today I got the oil pump modified for full sequential. Took me approximately 3 hrs to remove the pump assembly, disassemble, drill and tap the housing, test fit, find crank position on compression 90d BTDC, Drilled and tap cam pulley. Installed cam pulley, set cam sensor and pulley bolt clearance to 1mm. Used blue locktite. Then reassembled oil pump, reinstalled lines. Also managed to get rear engine tin back on. Along with exhaust mount bracket. Tomorrow I will be concentrate on installing wiring harnesses.

Old 06-17-2017, 04:16 PM
  Pelican Parts Technical Article Directory    Reply With Quote #219 (permalink)