Thread: Ring gap
View Single Post
boosted79 boosted79 is offline
Registered User
 
Join Date: Jan 2015
Posts: 1,263
If it was a Holset I could help you. They are 2.0 mm free gap and 3.5 mm clearance width between the rings and the wall of the shaft groove for a two ring seal.

that 2mm free gap is the minimum, they don't give a spec for max.

Last edited by boosted79; 07-18-2017 at 05:38 AM..
Old 07-18-2017, 04:10 AM
  Pelican Parts Technical Article Directory    Reply With Quote #2 (permalink)