View Single Post
Reuben.L Reuben.L is offline
Registered User
 
Reuben.L's Avatar
 
Join Date: Jun 2007
Location: Wellington New Zealand
Posts: 44
930 4 speed measurement please

Hi All,
I am trying to get a 930 back together that has been off the road for many years.
The current struggle is with the clutch assembly...
The ring gear is rubbing against the inside of the bell housing when it is all bolted up.
I am running an early style clutch with the ring gear spacer etc but do not think that is my issue.
Does anyone have a late 4 speed (long bellhousing) on a shelf in the garage that they can take a measurement for me please...
I have measured across where the starter bolts up and get 116.9mm, As shown in picture below
I am slightly suspicious that this one has been trimmed a small amount as it has all been fitted into a 1970 tub.

Any help much appreciated,
Cheers
Reuben
Old 07-25-2017, 07:19 PM
  Pelican Parts Technical Article Directory    Reply With Quote #1 (permalink)