View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 2,809
Pretty sure pegged gauge = no connection. You sure you got the right wire on it? - not the o/boost one. The o/boost = white.
Otherwise, try and verify continuity between the boost gauge terminal and the gauge end behind tacho. (ohm meter). I am suspecting the engine won't run if you have the white wire on the gauge - but worth checking.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 08-01-2017, 06:25 PM
  Pelican Parts Technical Article Directory    Reply With Quote #9 (permalink)