View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 2,808
If the ring gear is damaged to the point of not working, it should have gone thru a phase of partially working. As described above. In that phase you should hear a lot of gear knashing as the pinion gear tries to engage with a faulty ring gear. It will sound like bad synchros in your gear box as the pinion gear tears more metal off the worn ring gear. If you haven't heard this, then unlikely to be cause of start problem.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 08-01-2017, 08:05 PM
  Pelican Parts Technical Article Directory    Reply With Quote #13 (permalink)