Thread: Poor idling 930
View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 2,809
What WUR are you running? That sounds like a cold pressure rather than warm. Mine is supposed to be at 3.5 bar +/-
I don't know exactly about the timing - but many advance it slightly (5 deg or so) to improve throttle response. Advancing usually picks the revs up a bit. But I doubt that is the cause of the stumble issue. I would be looking at the WUR with those numbers. And when they are correct, if you still have an issue i would be checking each injector flow.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 08-06-2017, 06:26 PM
  Pelican Parts Technical Article Directory    Reply With Quote #53 (permalink)