View Single Post
turbobrat930 turbobrat930 is offline
E-85 sippin drunk
 
turbobrat930's Avatar
 
Join Date: Jan 2002
Location: Warner Robins, GA
Posts: 1,482
Quote:
Originally Posted by Ken911 View Post
there is a fluted baffle on the 3.2 engines not listed in parts on the 3.3's Since i have the bored out fully finned 3.2 cylinders do i need to get this? PN 930-106-301-00
I am running JB Racing's fully finned 98mm cyl's, and yes, I had to get both of those ( one for each side). They go on the top of each bank of three, up next to the spigot. Here is a picture... Hope this helps, Ken

[IMG]DSCN0811 by Brad, on Flickr[/IMG]
__________________
Brad...930 gt-1 racecar, increased displacement to 3.6L, JB racing Cylinders, JE 8 to1 pistons, stroked crank, Carrillo rods, extrudehoned 3.2L intake, full bay Bell I/C, GT-2 EVO cams, Rarly8 headers, GTX-35RS turbo, twin plug, P&P heads, Link G4 EFi system, G-50/50 with LTD slip and oil squirters/oil cooler, zork tube, full race coilover system, with carbon fiber body, full cage, E-85 sippin drunk

Last edited by turbobrat930; 08-08-2017 at 01:07 PM..
Old 08-08-2017, 01:05 PM
  Pelican Parts Technical Article Directory    Reply With Quote #2 (permalink)