View Single Post
bahnzai bahnzai is offline
Registered User
bahnzai's Avatar
Join Date: May 2002
Location: Columbia, SC
Posts: 240
930 hubs fit SC trailing arms?

ok, my dilemma...

I have an '83 SC that was converted to a turbo many years ago. I have been running it with the 915 gearbox, but the gearbox finally gave up the ghost, so I am converting the car to a 930 gearbox.

It is an '87 gearbox and I have had CMS shorten the main shaft & bell housing. The gearbox came with the output flanges. I have a set of turbo CV axles and a set of turbo stub axles...

The Turbo stub axles are longer than standard 911 SC stub axles, by an inch or more. I need to also add Turbo rear hubs to match the stub axles? and will the hub fit in an SC trailing arm?

Thanks for any advice, especially from those that have been down this slippery path!
'83 930 track beast
'73 914-6 3.6
'70 914-6 (looong term restoration)
'74 TR-6
Old 08-29-2017, 05:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)