View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
RarlyL8's Avatar
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,563
No need to lift the car, just jack the engine up enough to give you room to work.
No need to remove the crossover pipe, just pry it apart with a screwdriver and slip the new gasket in.
Yes soak the bolts with kroil or liquid wrench overnight. There are 6 bolts in that tight area, I would change both gaskets and all 6 bolts while you are in there. If the bolts are severely rusted break them off and punch out the remaining studs or use a torch.
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 09-15-2017, 06:40 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)