View Single Post
Raulg Raulg is offline
Registered User
 
Join Date: Mar 2009
Location: Northern Virginia
Posts: 218
87 951 No heat - pls help

I have a 1987 951. I tried the heat on a cool morning and no heat.
I checked the vacuum tube to the heater control valve and it was holding vacuum.

I checked the vacuum tube connections at the fire wall and both seem fine.
I then unplugged the vacuum line from the actual valve. When I press the arm that controls movement of the valve internals, and cover the vacuum port with my finger, the arm stays in place and moves when I remove my finger.

Where should I look next?
Is there anything else to check?
Could the control valve be broken internally?
Could the knob/switch on the dashboard be the cause?

Thank you for any advice you can provide
RG
Old 09-18-2017, 09:43 AM
  Pelican Parts Technical Article Directory    Reply With Quote #1 (permalink)