Thread: Success
View Single Post
SBK930 SBK930 is offline
Registered User
 
SBK930's Avatar
 
Join Date: Jul 2016
Location: Australia / Straya
Posts: 259
Garage
Quote:
Originally Posted by Alan L View Post
Well, here is hoping.
So what is the difference? You used a different builder. Do they have any idea what was wrong?
Fingers crossed.
Alan
Said they replaced the rings/seals and cannot explain the difference.

However all may not be well.

On second run the engine got very smokey. Pulled the I/C and compressor side was dry and clean. But I am not sure where the smoke is coming from. Some is definitely from the exhaust and I am going to remove the muffler today to check the turbine side. The smoke also could be from leaks landing on the heat exchangers.
The thing I did not like is that when it gets to operating temp which is about half on the temp gauge it is sounding a little tapperty.
Old 09-29-2017, 12:53 PM
  Pelican Parts Technical Article Directory    Reply With Quote #3 (permalink)