View Single Post
jpilcher jpilcher is offline
Registered User
 
Join Date: Mar 2010
Location: Hamilton, On
Posts: 747
Garage
Quote:
Originally Posted by smurfbus View Post
Philip, you might want to check your sensor calibration in boiling water and if its still between the fins. Hard to imagine cylinders dropping to 90F after they are warmed up unless the sensor is in direct airflow and not in between the fins.
Hi Phillip

I still have to check the clt temp, I will do that this morning. My sensor is located on cylinder number 3 cooling fins. A hole was drilled and tapped, and sensor was threaded into hole. Your problem might be a function of the location.
__________________
1988 Porsche 930 Targa - 3.4L Twin Plug Motor, DC 13 Cams, Supertec Head Studs, ARP Rod Bolts, Port and Polished Heads, Garretson Andial Intercooler, GSX 61 BB Stage 5Turbo, Tial F46 WG .8 Bar Spring, PowerHaus Headers, PowerHaus Dual Tip Muffler, MS3 Pro EFI conversion, 57lbs. Cobra Injectors, Center Force Stage 2 Clutch , Rebuilt 4 Speed with LSD.
Old 10-09-2017, 07:42 AM
  Pelican Parts Technical Article Directory    Reply With Quote #415 (permalink)