View Single Post
TurboKraft TurboKraft is offline
Registered User
TurboKraft's Avatar
Join Date: Mar 2005
Location: Phoenix, AZ
Posts: 2,340
If you want to fit a G50 into your 1987 930 chassis you must either:
a) shorten the transmissions
b) cut out the center of your torsion bar housing and weld in a G50 version -- now you need new custom 930/G50 torsion bars, or convert to coil-overs
c) cut out the center of the torsion bar housing and plate it, reinforce it, and tie it back to the chassis; and still convert to coil-overs
Chris Carroll
TurboKraft, Inc.
Tel. 480.969.0911
email: -

Last edited by TurboKraft; 10-09-2017 at 12:50 PM.. Reason: edit
Old 10-09-2017, 12:48 PM
  Pelican Parts Technical Article Directory    Reply With Quote #2 (permalink)