View Single Post
Alan L Alan L is offline
Registered User
Alan L's Avatar
Join Date: Apr 2006
Location: New Zealand
Posts: 3,261
fuel head flow rate query

Hi guys.
I am trying to find some factual flow rates for either the Aluminum head or more usefully the modified 007 head. I have the 007 head and in theory it should easily support the HP I have. But I am running out of fuel around 5500rpm (12.5+ AFR and climbing).
My pump flow rate is 1400cc/30 sec. My FD/WUR flow rate is 200cc/min (mid range spec). System pressure 100 psi.
What I would like to get is an objective number measured ex-FD that I can compare my head with. Maybe there is more left in the head. Dunno. And won't know until I can compare to some numbers. Hopefully something like injector flow at WOT.
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 10-23-2017, 03:44 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)