View Single Post
RarlyL8 RarlyL8 is offline
Crotchety Old Bastard
 
RarlyL8's Avatar
 
Join Date: Jan 2000
Location: Huntsville, AL
Posts: 13,255
Garage
Fuel flow minimum spec with Euro fuel distributor is ~1150cc/30sec. I didn't catch some of the important details in the earlier posts, such as you are seeing 1400cc/30sec which is what I use for minimum spec on the -007. Are your pumps OEM? What do you mean by no fuel head pressure, just the pumps blowing into a bucket? If so that is too low volume. Theoretically you should run out of fuel when the fuel exiting the injectors empties the flow to the point that no fuel is returning to the tank, 100% going to the cylinders. This isn't practical of course. Have you tested flow at the injectors? Curious to see what that figure is.
__________________
RarlyL8 Motorsports / M&K Exhaust - 911/930 Exhaust Systems, Turbos, TiAL, CIS Mods/Rebuilds
'78 911SC Widebody, 930 engine, 915 Tranny, K27, SC Cams, RL8 Headers & GT3 Muffler. 350whp @ 0.75bar
Brian B. (256)536-9977 Service@MKExhaust Brian@RarlyL8
Old 10-27-2017, 07:39 PM
  Pelican Parts Technical Article Directory    Reply With Quote #22 (permalink)