View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 2,809
Brian, correct me if I am wrong - but the Euro spec flow of 1150/30 sec is without the FD pressure. You take the fuel hose from the pumps as they enter the FD?
I have not measured at injectors - because I have had no numbers to compare to. If you say I need 1400/30 sec at injectors, I will measure this flow. That basically was my original query - some reference numbers at injectors or some other point to compare the 007 head to. As far as I know the pumps are factory. I have never had to inspect them to this point.
Regards
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 10-28-2017, 01:20 PM
  Pelican Parts Technical Article Directory    Reply With Quote #23 (permalink)