View Single Post
Trakrat Trakrat is online now
Registered User
 
Join Date: Oct 2016
Location: Kansas
Posts: 735
ok.... so I loosened all the valve clearances off the rockers at all the cylinders.

I set the timing to TDC... buuuuuuttt... it seems that cylinder #2 is tighter than a -fill in the blank-.
I loosened the intake valve as far as possible, but the rocker just will not budge.

So my question is..... will this be an issue when pulling the camshaft out???
__________________
1987 Porsche 911 Carrera Coupe
Old 10-31-2017, 12:22 PM
  Pelican Parts Technical Article Directory    Reply With Quote #43 (permalink)