View Single Post
Alan L Alan L is offline
Registered User
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 2,809
OK, I have 1600cc/min at the injectors, and around 2700cc/min at the FD with the current set up. This is with the WUR pressure around 3 bar - which is where it should be on boost.
So I should have enough fuel?
What I did find was quite erratic flow numbers in the 6 ports. It may be possible I can open some ports more. Altho, previously I had them all balanced nicely when the FD was installed. I can but try and open some ports some more. Will keep you posted.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 10-31-2017, 01:20 PM
  Pelican Parts Technical Article Directory    Reply With Quote #34 (permalink)