View Single Post
boyt911sc boyt911sc is offline
Registered User
Join Date: Mar 2002
Location: Philadelphia, PA
Posts: 9,277
Pop off valve installation.........

Originally Posted by Reiver View Post
Ok, you made me go look. You can see the dent in the filter screen, more obvious than the pic shows. I'm guessing you are referring to these screws.
They are all tight, none loose. So, the pop off saved me 400 or so bucks and time/labor. When I put this in I smoke tested it with a proper machine buy a gut familiar with this did take some time to get properly seated.


Are you aware that your POV is incorrectly mounted and installed on your air box? Take a closer look at the POV and it is resting on the plastic ribs instead on the flat base. This a common mistake committed by many DIYers including professional shops. While it is glued in place it is incorrectly mounted by your guy. This is easy to correct if you want to fix it.

Old 11-11-2017, 05:37 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #28 (permalink)