View Single Post
Kevin Powers Kevin Powers is offline
Registered User
Join Date: Feb 2002
Location: Tacoma WA
Posts: 1,379
get a peice of correct sized fuel line and cut a small piece. stick it on the return fitting. get a shoulderd bolt. stick it in the line. use a f.i fuel line clamp and tighten it up. about $. 25. i replaced the feed line from the tank with high presure fuel line (with enough slack so i can lift the tank and pull the line) from the bottom of the tank to the metal line that runs thru the big rubber block, thru the tunnel, out the firewall to the rotary pump. then i did the rest to the webers.

here? not so much i think. high five!!!
Old 10-05-2003, 06:39 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)