View Single Post
jvandyke jvandyke is offline
Registered User
 
Join Date: Apr 2016
Location: Hudsonville, MI
Posts: 147
OKay, verified install order but WOW the wear on the INSIDE of the fingers, where the stepped washer rides is EXtREME (I assume, nothing to compare it to)
So my theory is the release was loose before, we reinstalled on the loose side, not knowing any better and the whole bearing spins and wears the fingers rather than the one part of the bearing spinning independant of the other so the bearing is fine it's just not snug enough to spin, path of least resistance is for the whole thing to spin rather than the two halves, thus it wears like crazy and gets worse and worse
Regardless of the cause, a new PP is in order me thinks, maybe a used one as new is just too much $$ ($400???)
__________________
'87 924s resurrection project; '83 944 engine
Hudsonville, Michigan
Old 12-19-2017, 08:05 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)