View Single Post
ttt123 ttt123 is offline
Registered User
Join Date: Jan 2018
Posts: 6
So now onto the welding. I started out with just a quick tac weld every inch or so as I wanted to make sure it was secure to the body but I didn't want to cause any warping. once it was tacked on I then went back and would weld about 3 inches at a time and let it cool down before welding again. I also made a return at the bottom of both fenders so they were not just flapping around toward the bottom of the fender and welded those on as well.

Old 01-03-2018, 06:47 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)