View Single Post
surfdogskier surfdogskier is offline
Registered User
Join Date: Dec 2017
Location: Sevierville, TN
Posts: 62
cold start valve bypassed?

Hey guys,

Ok, so I cleaned out my injectors and they work great now. I thought I would go ahead and clean out the cold start valve. When I found it, I saw it was plugged in but the fuel lines were connected in a loop........It was about a 7in tube that went from one side of the CSV to the other side. No clamps, just hose.

My question is shouldn't the cold start valve be in the same fuel line as the injectors, the hose between injector 2 and 3?

I wanted to take it out to clean but getting to the bottom screw is about impossible.

Please correct me if I am wrong.

Thanks, Jason
1971 914-4
1972 914/4
1970 Toyota FJ40 Landcrusier
1999 Lamborghini Diablo (build)
Old 01-09-2018, 06:48 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)