|
Rear center torsion tube splines how long ?
Hi
911 1976 Narrow Body
Just finishing off torsion tube repair and noticed that the inner center torsion tube splines do not overlap the torsion bar splines i.e. difficult to measure however, I have 40mm of splines to accommodate both bar ends, yet the combined spline length of the inner bar ends is 50mm. I would have normally expected them to be at least the same length or overlap as they do at the spring plate end.
Anybody have a diagram or picture of a cross section of the rear center splines/Spline carrier/boss ? again would be very helpful.
Is this correct ?
Much appreciated.
Regards
Mark
|