Thread: Turn Signal ?
View Single Post
jayhawk jayhawk is offline
Registered User
jayhawk's Avatar
Join Date: Nov 2007
Location: Warsaw Missouri
Posts: 99
Turn Signal ?

I am having a problem with the passenger side front turn signal on my track prepared 1982 930.

Drivers side front and rear work fine, rear passenger side as well.

I have done all the basic stuff

swapped bulb left right - OK
cleaned bulb and socket connections - OK
checked the ground (brown) wire.- seems to have a good solid ground - it goes through the headlight socket to ground

I removed the fixture and have the wires all separated so i can check them. The black with white stripe wire is the turn signal wire. With ignition on and the turn signal activated I get voltage between it and the ground of about 3 volts. This voltage pulsates just like you would expect to see at the turn signal.

Appears i don't have enough voltage to light the light?

Any thoughts?


Past President KCRPCA
PCA National Certified Instructor
1982 930 Track Car "The Pumpkin"
2002 996tt X50 Lapis Blue Street Machine
Old 03-14-2018, 12:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)