Thread: Door stop
View Single Post
911nut 911nut is offline
Metal Guru
911nut's Avatar
Join Date: May 2001
Location: Michigan
Posts: 2,514
Yes, but it's easy to do.
You have to have access to the interior of the door to remove the old stop and install the new one.
I don't recall the exact sequence but it's mostly taking screws out (do a search on door panel removal).
Be sure to inspect the mounting through holes for cracking. If cracks are present (usually the driver's door cracks first), get the cracks welded and ground and install the reinforcement plate our host sells.
Paul B.
'91 964 Turbo
Port matched, SC cams, K27/K29 turbo, Roush Performance custom headers w/Tial MV-S dual wastegates, Rarlyl8 muffler, LWFW, GT2 clutch & PP, BL wur, factory RS shifter, RS mounts, FVD timing mod, Big Reds, - 210 lb
Old 04-05-2018, 06:11 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)