|
|
|
|
| Author |
|
|
Guest
Posts: n/a
|
I looked up the codes for my BMW 328i 2007-
Codes read on 2/8/17- 2A99-crank shaft exhaust camshaft correlation read on 2/9/17 2ef4 map thermostat, mechanics cf- misfire during warm up cylinder 3 29cf misfire cylinder 3 codes read 2/10/17 2A43 valvetronic, thermos overload protection warning threshold 29EO fuel mixture control 29E1 fuel mixture control 2 Based on this info, does it seem likely that I have a feeling spark plug on cylinder three. And possibly a feeling camshaft or crankshaft position sensor? I recently changed my thermostat and water pump on this car with no leaks or issues with coolant. __________________ This post was auto-generated based upon a question asked on our tech article page here: BMW E90 Camshaft Position Sensor Replacement | E91, E92, E93 | Pelican Parts DIY Maintenance Article |
||
02-14-2017, 08:24 AM
|
|
|
Moderator
Join Date: Jan 2015
Posts: 127
|
Seems like a few different things going on, the cam and crank correlation is likely the root cause of the codes that followed. Have the cam timing checked and then go from there.
- Casey |
||
|
02-14-2017, 08:24 AM
|
|
