Sport or Boxercup R1100S Portable Suspension Stand if You Need One

[ckcarr]

I'm not selling one, but just finally, after a gap of 23 years, bought one from Hornig.

If your bike came with a center stand, then you can disregard this.
And, this only applies to the R1100S, not the R1200S or HP2 Sport.

They have a sale going on at 20% off through April 10th (although shipping will kill you) and I could never find one of these. Which makes it a real pain to work on without one. I was actually surprised they had anything left for the R1100S. They also have what looks to be a really nice carbon fiber hugger also. Pretty expensive though.

So I'm just passing on information.

You MUST enter code HORNIG2023 to get the discounts, and only through April 10th. This applies to any bike, not just the R1100S.

https://www.motorcycleparts-hornig.com/

[tomvv11]

After discount the hugger is only $288 plus shipping, which ain't bad compared to most sources. Have to act soon though.

[908/930]

I'm thinking you have no bristles left on your tooth brush after cleaning that bike. You screwed up the picture by leaving the side stand down and your 12v aux power cap open. Nice bike!

[duckbubbles]

I took a stock centerstand to a shop and had them add 3/4 inch to the lower legs so it would work with my '03 BCR. Two finger tight screws and it comes off for riding.

Frank

[wswartzwel]

I think there is a fingerprint smudge on the paint, You better wax and detail it again.

[ckcarr]

That's probably from Ralph or Rick when they were here a couple years ago...

Originally Posted by wswartzwel

I think there is a fingerprint smudge on the paint, You better wax and detail it again.

[ckcarr]

I have always only used this stuff on the paint. It's expensive but the former owner of Foothills BMW used on all the bikes. So it's all I buy.

https://saeng.com/product/aerosol-polish/

[RBMann]

Originally Posted by ckcarr

That's probably from Ralph or Rick when they were here a couple years ago...

Thumb print or some other finger? My right thumb is missing most of the print and the left has a scar down the middle. Hope this helps.