|
|
|
|
| Author |
|
|
Registered
Join Date: Jun 2010
Location: Barstow
Posts: 64
|
Accessory Plug Location
I have the BMW plug that is mounted on the left side of the frame between the seat and footpeg, but I want to add one on the front of the bike to plug in my tankbag. Preferably in the space under the instruments, or in that general under the fairing area. I don't want to drill any holes in the bodywork. Has anyone done this? If so, pics would be a plus. Thanks.
|
||
08-31-2011, 02:34 PM
|
|
|
Registered
|
Fuse box from Eastern Beaver under the left side fairing on my R1200s, runs an always hot cable that plugs in to the tank bag via a Powerlet tank bag adaptor kit. When nothings plugged in inside the tank bag, no current flows. But when I stop for gas on a long trip, my cell phone keeps charging, and if I need a compressor, I can use it.
__________________
’68 R50/2(1968 was Dad's then mine to 1990) SOLD ’07 BMW F800S (3/2007-9/2008) LEMON'D '07 BMW R1200S black CF/white tank panels (acquired 10/24/2008) My bike here: http://tiny.cc/MyBike |
||
|
09-01-2011, 08:27 AM
|
|
|
Registered
Join Date: Jan 2010
Posts: 863
|
Like so? Right side the R1200S. I built a simple bracket out of aluminum and purchased a waterproof marine 12V outlet. I attached the bracket by putting black silicone on the back of the aluminum and then zap strapping it through existing holes in the structure there.
__________________
2008 HP2S Sport Touring 2009 525 Beta RR North Vancouver Last edited by LeftCoast Peter; 09-01-2011 at 05:11 PM.. |
||
|
09-01-2011, 05:08 PM
|
|
R1200SCF
