Anyone with a cayman pandem kit installed

[hmdznrcld]

I could use a little advice on your radiator setup.

Did you need to modify anything to get the front bumper installed?

What size wheel did you run? Offsets?



TIA

[VWLoosenuts]

Originally Posted by hmdznrcld

I could use a little advice on your radiator setup.

Did you need to modify anything to get the front bumper installed?

What size wheel did you run? Offsets?



TIA

Hey

You need to move both radiators forward a minimum of 1". I welded new tabs on mine to move them forward. I am running 19" wheels and I believe you will need to do this with 18s also.

The front wheel spec is a 19x10 with a -12 offset if I did it again I would go -9 the -12 is fine just
The rear wheel spec is 19x12 with a -50 offset. if I did it again I would go -65 but works with the -50 absolutely fine just visually personal preference would be the -65 as I added a 15mm spacer on my -50s.



These are without the 15mm spacer on the rear.

[hmdznrcld]

Originally Posted by VWLoosenuts

Hey

You need to move both radiators forward a minimum of 1". I welded new tabs on mine to move them forward. I am running 19" wheels and I believe you will need to do this with 18s also.

The front wheel spec is a 19x10 with a -12 offset if I did it again I would go -9 the -12 is fine just
The rear wheel spec is 19x12 with a -50 offset. if I did it again I would go -65 but works with the -50 absolutely fine just visually personal preference would be the -65 as I added a 15mm spacer on my -50s.



These are without the 15mm spacer on the rear.

Hey thanks so much. I'm having to install radiators so I guess there's another thing to do. I have the center radiator installed now so hopefully that 1" doesn't hurt.

Again thanks

[Hydepark]

this car is a beauty