|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2024
Posts: 7
|
Wrist Pin Bushing Tolerances
Does anyone know the tolerance specification for the wrist pin bushing on the rod? I recently purchased new bushings for my 2006 3.2 and plan to take them to a machine shop for installation. I've heard various opinions, such as the pin in the bushing should exhibit very little to no side-to-side play but no spec. Is a clearance of .002" acceptable?
|
||
02-26-2025, 10:45 AM
|
|
|
Banned
Join Date: Feb 2025
Posts: 7
|
For your 2006 3.2 engine's wrist pin bushing, a clearance of around .002" is generally acceptable and falls within typical tolerance ranges.
|
||
|
03-01-2025, 03:17 PM
|
|
