Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   Canada (http://forums.pelicanparts.com/canada/)
-   -   Parts Needed \ WTB (http://forums.pelicanparts.com/canada/710841-parts-needed-wtb.html)

haycait911 10-11-2012 08:42 AM

Parts Needed \ WTB
 
this is the flip side to Jim's thread here........http://forums.pelicanparts.com/canada/710799-parts-sale.html

Post parts needed here.

a lot of us have parts that we'll never get around to listing for sale. with the rising costs of cross-border shipping we can all save money dealing in-country as much a possible.

let's keep it within Canada and please limit to wanted-to-buy parts only. use Jim's thread for items for sale.

SmileWavy

haycait911 10-11-2012 08:48 AM

wanted - flat six fuchs
 
need a single or pair, mid-year flat six. surface condition not really important as long as it's straight and there's no major curb rash. Don.

MARTIN AIDE 10-11-2012 02:44 PM

Need a 73S oil tank if anyone has one
Thanks for this and good idea

Mark Henry 10-12-2012 08:05 PM

Cool Idea!
Check back on my list because it will grow for sure.
Many engine rebuild new parts I'll get off out host, but if you have anything for a 3.0 SC let me know.
Of course I'm looking for 914/6 conversion bits.


one 3.0 SC head I need one '78-'79 or a ROW bigport 3.0 head to-'83

80-83 3.0SC 225mm flywheel big hole, 9-bolt.
Like the left on in the first pic except a big hole centre, unfortunately the later 930 (right) flywheel 240mm will not work.
I will be making a conversion ring like the one at the top of the pic.




http://forums.pelicanparts.com/uploa...1350143717.jpg
http://forums.pelicanparts.com/uploa...1350143756.jpg

gtihop 10-13-2012 07:22 AM

Need left and right hot air sockets for around the engine fan for heater backdate on a SC

haycait911 10-23-2012 04:57 PM

Quote:

Originally Posted by gtihop (Post 7029033)
Need left and right hot air sockets for around the engine fan for heater backdate on a SC

I think I have a pair. pm me your email. Don.

haycait911 10-23-2012 05:05 PM

need:

- 3/4 - 1 inch H&R or similar bolt on spacers ( not the kind that need longer studs )

- Carrera or SC decklid ( prefer no spoiler holes )

- H5 or sugar scoop headlamps

- junk/challenged Weber IDA/IDT carbs

Brian 162 10-23-2012 05:47 PM

I have a gaurds red deck lid BUT it has holes from a spoiler.

exc911ence 10-23-2012 05:47 PM

Need:

Complete pair of rear seatbelts for 1975 911S coupe.

JohnJL 10-23-2012 06:39 PM

I have them from an 82, same thing?

exc911ence 10-24-2012 05:50 AM

Quote:

Originally Posted by JohnJL (Post 7048796)
I have them from an 82, same thing?

Looks like it according to our host's parts catalogue:

Quote:

Rear seat belts didn't appear in most 911s until 1978. However, the bolt holes for mounting the rear seat belts were incorporated into each chassis. Therefore, you can upgrade your pre-1978 Porsche with seat belts from the 1978 and later 911SCs. A common wear item on the rear seat belt is the plastic sleeve that the belt rides in. Unfortunately, the outside plastic sleeve is only replaceable if you purchase the entire rear seat belt assembly.
Who knew that my car never had rear belts?

So, what are you looking to get for your set? PM, if you'd prefer. :)

Jim2 10-24-2012 08:22 AM

Don I have a pair of 17mm spacers w/60 mm studs, genuine porsche 996 pn. Also have a 74 tach
Quote:

need:<br>
<br>
- 3/4 - 1 inch H&amp;R or similar bolt on spacers ( not the kind that need longer studs )<br>
<br>
- Carrera or SC decklid ( prefer no spoiler holes )<br>
<br>
- H5 or sugar scoop headlamps<br>
<br>
- junk/challenged Weber IDA/IDT carbs

JohnJL 10-24-2012 09:37 AM

Quote:

Originally Posted by exc911ence (Post 7049401)
Looks like it according to our host's parts catalogue:



Who knew that my car never had rear belts?


So, what are you looking to get for your set? PM, if you'd prefer. :)

Give me a day or two to check their condition and I'll PM you. They are surplus to my needs so happy for them to go to a happy home.

rvanderpyl 10-26-2012 04:54 PM

Long shot since here aren't many around

914 1974

WTB

Good dash, no cracks, no dents etc.
Chrome front and rear bumpers, no dents, chrome must be good driver quality
Pretty much any rubber seals, targa top, doors, etc
Uprated pistons/cylinders, want to keep the fuel injection, so can't go much bigger, or high CR, but a bit more oomph would be nice.
Rear shocks/springs thinking 140lb springs
Rear and front sway bars and fittings
Front fog lamps and mounts. As well as chrome grills

Anything else you have mention it, I might be interested

1986 944 NA

Dark brown dash, no cracks, no fading

haycait911 10-26-2012 11:11 PM

hi Robert. I was going to chrome these for TTG lights but I'll probably never get around to it. make me a fair offer if you can use them.

http://forums.pelicanparts.com/uploa...1351318091.jpg


http://forums.pelicanparts.com/uploa...1351318122.jpg

exc911ence 10-27-2012 07:32 AM

Quote:

Originally Posted by JohnJL (Post 7049820)
Give me a day or two to check their condition and I'll PM you. They are surplus to my needs so happy for them to go to a happy home.

Great! http://forums.pelicanparts.com/suppo...s/beerchug.gif

GWN7 10-27-2012 11:35 PM

I need a pair of seat belt brackets and the mounting hardware to fit a 73 seat? :)

flatland11 10-31-2012 10:58 AM

decklid
 
black decklid no holes if interested

gtihop 10-31-2012 06:15 PM

Quote:

Originally Posted by haycait911 (Post 7048542)
I think I have a pair. pm me your email. Don.

pm sent a few days ago...thanks

rvanderpyl 11-04-2012 05:55 PM

Good usable bilstein, Koni, or boge, insert for 85-89 boge struts


All times are GMT -8. The time now is 09:17 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.