Parts Needed \ WTB

[haycait911]

this is the flip side to Jim's thread here........Parts For Sale

Post parts needed here.

a lot of us have parts that we'll never get around to listing for sale. with the rising costs of cross-border shipping we can all save money dealing in-country as much a possible.

let's keep it within Canada and please limit to wanted-to-buy parts only. use Jim's thread for items for sale.

[haycait911]

need a single or pair, mid-year flat six. surface condition not really important as long as it's straight and there's no major curb rash. Don.

[MARTIN AIDE]

Need a 73S oil tank if anyone has one
Thanks for this and good idea

[Mark Henry]

Cool Idea!
Check back on my list because it will grow for sure.
Many engine rebuild new parts I'll get off out host, but if you have anything for a 3.0 SC let me know.
Of course I'm looking for 914/6 conversion bits.


one 3.0 SC head I need one '78-'79 or a ROW bigport 3.0 head to-'83

80-83 3.0SC 225mm flywheel big hole, 9-bolt.
Like the left on in the first pic except a big hole centre, unfortunately the later 930 (right) flywheel 240mm will not work.
I will be making a conversion ring like the one at the top of the pic.

[gtihop]

Need left and right hot air sockets for around the engine fan for heater backdate on a SC

[haycait911]

Originally Posted by gtihop

Need left and right hot air sockets for around the engine fan for heater backdate on a SC

I think I have a pair. pm me your email. Don.

[haycait911]

need:

- 3/4 - 1 inch H&R or similar bolt on spacers ( not the kind that need longer studs )

- Carrera or SC decklid ( prefer no spoiler holes )

- H5 or sugar scoop headlamps

- junk/challenged Weber IDA/IDT carbs

[Brian 162]

I have a gaurds red deck lid BUT it has holes from a spoiler.

[exc911ence]

Need:

Complete pair of rear seatbelts for 1975 911S coupe.

[JohnJL]

I have them from an 82, same thing?

[exc911ence]

Originally Posted by JohnJL

I have them from an 82, same thing?

Looks like it according to our host's parts catalogue:

Rear seat belts didn't appear in most 911s until 1978. However, the bolt holes for mounting the rear seat belts were incorporated into each chassis. Therefore, you can upgrade your pre-1978 Porsche with seat belts from the 1978 and later 911SCs. A common wear item on the rear seat belt is the plastic sleeve that the belt rides in. Unfortunately, the outside plastic sleeve is only replaceable if you purchase the entire rear seat belt assembly.

Who knew that my car never had rear belts?

So, what are you looking to get for your set? PM, if you'd prefer.

[Jim2]

Don I have a pair of 17mm spacers w/60 mm studs, genuine porsche 996 pn. Also have a 74 tach

need:<br>
<br>
- 3/4 - 1 inch H&amp;R or similar bolt on spacers ( not the kind that need longer studs )<br>
<br>
- Carrera or SC decklid ( prefer no spoiler holes )<br>
<br>
- H5 or sugar scoop headlamps<br>
<br>
- junk/challenged Weber IDA/IDT carbs

[JohnJL]

Originally Posted by exc911ence

Looks like it according to our host's parts catalogue:



Who knew that my car never had rear belts?


So, what are you looking to get for your set? PM, if you'd prefer.

Give me a day or two to check their condition and I'll PM you. They are surplus to my needs so happy for them to go to a happy home.

[rvanderpyl]

Long shot since here aren't many around

914 1974

WTB

Good dash, no cracks, no dents etc.
Chrome front and rear bumpers, no dents, chrome must be good driver quality
Pretty much any rubber seals, targa top, doors, etc
Uprated pistons/cylinders, want to keep the fuel injection, so can't go much bigger, or high CR, but a bit more oomph would be nice.
Rear shocks/springs thinking 140lb springs
Rear and front sway bars and fittings
Front fog lamps and mounts. As well as chrome grills

Anything else you have mention it, I might be interested

1986 944 NA

Dark brown dash, no cracks, no fading

[haycait911]

hi Robert. I was going to chrome these for TTG lights but I'll probably never get around to it. make me a fair offer if you can use them.

[exc911ence]

Originally Posted by JohnJL

Give me a day or two to check their condition and I'll PM you. They are surplus to my needs so happy for them to go to a happy home.

Great!

[GWN7]

I need a pair of seat belt brackets and the mounting hardware to fit a 73 seat?

[flatland11]

black decklid no holes if interested

[gtihop]

Originally Posted by haycait911

I think I have a pair. pm me your email. Don.

pm sent a few days ago...thanks

[rvanderpyl]

Good usable bilstein, Koni, or boge, insert for 85-89 boge struts