lit round toggle switch?
 

The tiny 3/4" round ones. Know of any that are lit but another indicator may come on telling the operator that it is on. I like them dim enough without staring into LED hell. I have to drive through some very, very dark and narrow streets up to my house. One street light at each intersection if we are lucky but that's the charm. My big old truck can barely make some of the turns so I installed a set side shooters Rigid fog lights. They aren't on with normal driving because we have plenty of lights on our streets and fwys. My problems is, the left side of the dash is so dark that I have to feel for the tiny switch and half the time, I can't find it. By the time, I get to the damn thing, I already smashed into someone's trash can or done with the turn. Any suggestions. found nothing on Amazon, plus most are junk.

Mouser.com

Digikey.com

Alliedelec.com

Maybe something like this?

1 Pair Heated Seat Switch, Universal 12V 3 Pins Car Seat Heater Switch Hi/Low/Off Round Rocker Control https://www.amazon.com/dp/B073CKHWSP/ref=cm_sw_r_cp_api_glt_fabc_6352NP7KYHEBTBJT677V

Thanks, but off with no light aint no good

Does it have to be round?

https://www.amazon.com/Rough-Country-Single-Backlit-Standard/dp/B0143LH8GK

Red Beard, That's a lot of switches. I scan through them quickly, but haven't seen any yet, but will dive deeper into those places later. Thanks.

Hey Dave, Staying dry out there?

I drilled a round hole to fit one of those tiny switches on the left side of the dash only to discovered that no light aint no good in the dark for me

I installed a lot of these.

https://www.amazon.com/Carling-Rocker-Switch-OFF-waterproof/dp/B07DYBVP3Z

The rectangular hole is pretty easy to cut.

What about putting an led in the dash next to the switch.


Sent from my iPad using Tapatalk

Modify your amazon search to: 'zombie light switch'

https://www.amazon.com/Rocker-Switch-Charger-Socket-Marine/dp/B06XTFWW48/ref=sr_1_8?crid=1DYSS0OX18HB1&keywords=zombie+ligh t+switch&qid=1640794926&s=industrial&sprefix=zombi e+light+switch%2Cindustrial%2C55&sr=1-8

http://forums.pelicanparts.com/uploa...1640795061.jpg

The switches are available separately.

Looks like it will have to be a toggle switch instead of a small button. Now I have to think about cutting up the dash for this.

Now you're cooking with gas!

http://forums.pelicanparts.com/uploa...1640801261.jpg

That one if the the bald, backward wearing baseball cap, no neck, 350lbs, guys with a 10" lift on their truck, mud tires that has no scratch on its bed. Yep, that's me.

aircraft spruce
https://www.aircraftspruce.com/search/search.php

If you hit the led with a bit of paint/nail polish, it makes for a much less obnoxious light.

Check these out



https://d114hh0cykhyb0.cloudfront.ne...s-xPBT-SPx.jpg

push button lighted switch

Lighted rocker switch

LED lighted rocker switch

That’s the one I used for a project.
It would work well for what you’re looking to do.
It’s easy to wire up to do what you want, I.e. to be illuminated even when the lights are off.
The instructions are on my second post here:

https://forums.pelicanparts.com/off-topic-discussions/1108432-wiring-illuminated-switch-ground-side-possible.html

You could wire yours up like the bottom picture, it should work.

wow, dang. Those looks like it will work even if they don't light up when the device is turned on. I can deal with that. Thanks again Tim and McLovin.

This is for my Chevy truck also

On Amazon for $8

http://forums.pelicanparts.com/uploa...1640832530.jpg

The silver nut of course goes behind your panel. So it’s a nice, clean and small install.