![]() |
Panasonic for me. Nothing else. I buy them on Marketplace for $10 or less. Every single one has a blown fuse.
I have two at home, and one in my office now. They are great and well priced. |
More on the combo: don't expect any one with the oven feature to cook anything but crescent rolls. Baked potatoes are out of the question unless you have all day. Well, I have what they call a toaster oven and it's slow to do anything including toast. I didn't spend the money.
There is something called a Ninja 14 in 1. First thing I saw was Jeff's idea that steam was good. It has steam. Having a good oven/microwave combo means you can have baked potatoes in 9 minutes and they are very good. I've braised vegetables in one and the broiler function is quite good. I have a GE Speed Cook oven that cost over 2K new that I bought scratched on the face (it's built in) so I got it very cheap. It's been a mainstay in the kitchen because the main oven is an old Wolf commercial range with 4 burners and a griddle that I have used once. It takes 30 minutes to heat the griddle or oven to the correct temp. Not a good choice for the home kitchen but it looks cool. Mine doesn't have the salamander which I would use. https://i.ebayimg.com/images/g/ScQAA...Fr/s-l1600.jpg So this isn't mine. (Mine is cleaner as you would hope) The griddle is level with the 4 burners. I'd almost pull it out and convert but I put a cutting board on it. Very handy. The oven will do two 20 lb turkeys side by side. Too much. So, a really good counter top micro/combo can be a real trick item in the kitchen f you want to spend over $400. I would if I didn't have the Speed Cook. https://images.webfronts.com/cache/f...box_ffffff_100 It uses halogen lamps and a LOT of electricity! |
I like taking a small fluorescent tube and seeing how much of the Microwave beam is leaking thru the radiation door mesh and seal because of a poorly designed Microwave emitter which costs more.
|
I have a simple 30" over-the-stove microwave.
It vents to the outside. Very functional. Good for venting cooking vapors, or when the oven setting off the smoke alarm. |
Thanks for the comments guys and gals.
I did some investigating and found that there was some 'debris' on the inside under the turntable that looked like old coffee, which we don't drink. So something must have boiled over and didn't get cleaned up. We've cleaned it out and are using it again. Time will tell if we really need to get another one but I'm guessing we won't. If the smell doesn't go away we will be though. |
My ol' girl of a microwave was still heating food, but the numeric display faded and then went out. Shrug. Looked at the date of mfr and it was 20 years. I think I got my monies worth. Amazon for a new one. 1.6 cu ft is a perfect middle size.
|
Well I tried to get the smell out but it's not working so I bought a new GE micro this morning.
Wife wanted simple to operate and this is as close to our old one operating wise as I could find. No frills but works and is almost as powerful as the old one so cook times should be the same for most things. http://forums.pelicanparts.com/uploa...1707078041.JPG Going to be different with a black blob instead of a white blob sitting on the counter. |
^^^ That's a nice looking micro.
|
Quote:
|
You know Scott, great minds do think alike. I know, its all your wife. You tell that young lady that she has good taste.
Ours is the Space Saver. Its is 13" deep and a normal dish fits in there with a couple inches of extra room to move things areound. We never wish for a larger interior. Look like you have the bigger brother. My first one lasted 14 years. It was their Monogram, high end, right? Nicer stainless trim but the guts are all the same. We have their reg one now and its been great so far.http://forums.pelicanparts.com/uploa...1707093194.jpg |
Those really old microwaves work well, but the newer ones that are inverter work better.
On an old microwave doing defrost they would go full blast for a few seconds wait a number of seconds then full blast again. Whereas an inverter on works like a 100 watt microwave with just enough power to do the defrost. Also when on full blast the microwaves are spread out better in the box and doesn't need a turntable going round. |
These are good videos to watch. I bought a new microwave 3-4 years ago and like it except for one missing feature, buttons aren't lit. and they are fairly dull so dim light makes operating it difficult, mostly because I use the 50% power at a longer time a lot of the time. Otherwise it's a nice stylish LG. I will put it on the curb with a free sign if I can stumble up a good lit button box.
<iframe width="1182" height="665" src="https://www.youtube.com/embed/_IRAi6Nzxbk" title="Equipment Review: The Best Microwave Ovens" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe> <iframe width="1182" height="665" src="https://www.youtube.com/embed/dJrdXRZ3PUE" title="Your Microwave's Most Underrated Button | Techniquely with Lan Lam" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe> <iframe width="1182" height="665" src="https://www.youtube.com/embed/pg_lqy1p6B4" title="Are You Getting The Most Out Of Your Microwave? | Gear Heads" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe> |
The only modification I had to make to the 'install' of the new micro is I put some 'no slide' material under the feet to keep it from sliding around on the counter top. The feet seem to be made of a hard rubber that doesn't grip the surface very well. No sliding now and you can't even tell the material is there.
I hope I outlive this one, just like I did the last one. |
Quote:
|
| All times are GMT -8. The time now is 11:10 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website