![]() |
Wow. What a game changer.
I work with contractors on their insurance. I know many many cases with roof-fall injuries. Some folks never recover. Thanks! |
For as simple as the thing is...$70 seems a little high.
Someone will see that and build and sell them for less. |
Quote:
I'll still go up the ladder, just not going on the roof. |
^^^ I have a dormer on one side of the house that sometimes needs cleaning. The roof is a low pitch near the dormer which makes it easy to walk around with no fear.
The rest on the roof is too steep...I won't get on it without a throwing a rope over the peak and securing it. |
Quote:
|
I just had a standing seam metal roof installed. No more screws to tighten every year. I do clean the two wood stove pipes come fall. That tool looks to be in my future.
|
Its hot out . You wont find me on any roofs for another few months
<iframe width="560" height="315" src="https://www.youtube.com/embed/ChmUC0OysoU?si=rlepRv7h_7AvM-gN" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> |
it's a good idea...I even went looking..
But $70.. I will stick with the strap that I loop from the ladder to one of the pipes sticking out of the roof convenient near the gutter (plumbing vent?) |
Quote:
|
Quote:
Quote:
In our old house (2 story, hip roof) I was quite comfy getting on the roof. I could use the privacy fence next to the garage to get on the garage, and then from the peak of the garage could get on the second story roof. It was fine to walk around. I installed weather station gear up there by strapping it to the top of the chimney (anemometer and vane). I did get much more careful when standing right on the edge. I've been on the roof of our current house once, and wasn't a huge fan. It's a 7/12 pitch, and 30º feels pretty steep when you're walking on a 2 story, pier and beam house. |
Quote:
|
Quote:
|
15 years ago I did a metal roof on my 2,000 sq/ft side spit by myself with some help from friends with the sheets.
Spent many hours trimming back the shingles and laying the strapping. All went well. The final thing I had to do was the ice guards. I found myself reaching down to screw them in as I was not comfortable getting closer to the edge even though I been at the edge many times. Something in my head had snapped and I was suddenly fearful. After many years on roofs, I can no longer do it. Sucks getting old. |
To make a fall off my roof even worse....there is a 3-4 ft border of stone and small rocks around the whole roofline. Not much 'give' to them.
|
Bok bok bok...
|
^^^ yep...but still alive.:D
A few years back, I had to do some work on the steepest pitch of my roof. I needed both hands for the work, so I took two 12ft 2X4' and joined them for a total of almost 24 ft. I nailed stepping cleats to it and a one foot lip at the top. I slid it up the roof on it's smooth side and flipped it over so the lip was over the peak. I could then easily walk up to the work area and didn't have to hang onto anything. |
|
Difference between an asphalt roof and a metal roof is if you sit or kneel on a steel roof you slide to the bottom.
|
I grew up the son of a roofer. I've been up and down so many ladders onto and off of so many roofs (often carrying heavy buckets or bundles of shingles) that I have no issue going up and/or down ladders.
BUT as I've gotten older, I DO always use ladders now. I used to just pull myself up onto the roof and then jump back off if we threw a frisbee up on it or something. Till I fell and broke my wrist (getting older sucks). A few days ago, the neighbor's kids (boys around 10-12) went up on their roof for some reason using a painter's ladder (A-frame). I was out watering and saw them trying to get OFF the roof, and they were obviously scared. Went and held the ladder for them. I'm sure they'll think twice about using that type of ladder again--maybe :p |
Quote:
|
All times are GMT -8. The time now is 07:59 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website