Mach 6.5
 

And it's a wide-body!
Beijing to New York in two hours...doubt I'll ever see it.

https://www.yahoo.com/news/china-hypersonic-jet-flies-blazing-103603904.html

https://s.yimg.com/ny/api/res/1.2/xu...454af954b693f2


.

I call BS.

The SR71 was made of titanium and required the panels to not be tight together to allow for thermal expansion, and it had a special fuel and tanker just for the SR71. The SR71 had a top speed of Mach 3.2 but some say it hit Mach 3.5. Many parts of the SR-71 reached from 400-500 degrees Fahrenheit, but the airframe above the engines reached over 1,000 degrees. Overall, the average skin temperature of the SR-71 was over 600 degrees. The quartz glass in the cockpit was 1.25-inches thick, and was hot to the touch from the inside! Pilots, even with gloves on, couldn’t keep their hands by the glass for more than a few seconds without doing damage

Maybe if it can get to 100,000 feet where the air is thinner, but that is pretty high for air breathing aircraft.

If one can believe them...they say in the article that a prototype has already been test flown at mach 6.5

Sure, and they are not really hacking all the phone systems in the USA!

If they can build one that will haul a couple hundred or more passengers...it would be great.

I’ll believe it when I see it. That sort of speed is difficult for a weapons system with limited maneuverability, for a passenger airplane it would require some major breakthroughs.

Simple. Engage quantum drive.


Like The Orville.

Yeah...it's not like they achieved warp drive.
That will come later.

They have better jets

Sent from my SM-A155F using Tapatalk

^^^ Ahh....I see. :(

Geez guy, they simply spray the airplane with wesson oil. That way the air slides right off.

Boy, it's like I have to think of everything.

http://forums.pelicanparts.com/uploa...1734179436.jpg

I'm gonna use this on an aviation site I'm on!
Thanx!

I'm sure that we're all aware of the facts about the SR-71 and the details required to get it to go over mach 3 at 85000'. I assume it's quite a bit more difficult to get a passenger plane to go nearly twice as fast.

Although I did see Tom Cruise go over mach 9 in the latest Top Gun movie!

that's probably quicker and easier than wiping it down with vaseline which is what I told them to do.

The govt being who they are and with all of those smart folks, I'm sure that they probably went this route.

http://forums.pelicanparts.com/uploa...1734204463.jpg

^^^ Remember 'Mighty Lube'?
The inventor and owner lives on my street.
His stuff is used all over the world.

Hypersonic drone in 2019
https://militarywatchmagazine.com/article/why-china-s-new-wz-8-hypersonic-surveillance-drone-is-very-bad-news-for-the-u-s-navy

More on the WZ-8 in 2021
https://militarywatchmagazine.com/article/china-worlds-only-hypersonic-aircraft
AVIC WZ-8
https://en.wikipedia.org/wiki/AVIC_WZ-8
Would be quite the leap to make an unmanned rocket powered drone requiring a mother ship into a commercial passenger platform, but the speeds have been done which is my point.

is that anything like

http://forums.pelicanparts.com/uploa...1734205933.jpg

or

http://forums.pelicanparts.com/uploa...1734205933.jpg

^^^ I don't think he advertised it as such...but it probably would have worked...in a pinch :D

Thanks George...interesting stuff...especially the first link.