![]() |
treating a rusty ol' tailpipe, runners, etc.
not on the Pooschey, but I'd like to make the exhaust on my VW Vanagon last as long as I can
is the stuff that Eastwood makes better than the paint I can buy OTC? if I don't use the Eastwood stuff, I plan to just sand a bit and then either use Rustoleum primer & paint or use a rust reduced as primer thoughts? |
If you are talking about what eastwood calls "manifold dressing" IT works very well. I used it many times on cast iron exhaust manifolds, and even used it several times on steel headers. It holds well. I have even used it on old rusty heat exchangers that I sandblasted first, and it also retained its color and adhered well.
|
thx - yes, the manifold dressing
you like that better than Rustoleum? do you put a primer on first? |
Calyx manifold dressing is a lot easier to use than any paint and it works better than any paint I've ever tried.
Home |
Eastwood's products cannot really be compared to Rustoleum, they are THAT much better! Wuerth also makes a heat resistant paint that works well, but the Eastwood manifold paint is better, I've tried all of them...
|
thanks!
sounds like Eastwood just sells the Calyx dressing, so I might be able to find it locally and avoid shipping (?) know if any parts chains carry it? |
Quote:
|
Sounds like you best see one of them there proctologists if'n you's got a rusty tailpipe with runners... :D
|
I found the container of Calyx I had left over from doing my truck. It took about half a teaspoon to do this manifold. I painted the header pipe because it runs cool enough that it doesn't burn off high temp paint. I have to redo my manifold because I got the Calyx too thick in some spots and it popped off. If you want, I'll send you what I have after I take out enough to redo the manifold. PM me if you're interested.
http://forums.pelicanparts.com/uploa...1299514502.jpg |
Por-20
|
Randy,
The lost container of Calyx has been, found, relost and finally refound and is on its way to you. |
Thanks!
|
All times are GMT -8. The time now is 05:22 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website